When it comes for you to install laminate flooring for stairs, you have to be more precise when it is the time to cut each piece which you install on the stairs. Risers, treads and stair noses are a couple of important things that you have to consider. You will get the best look of the staircase without spaces and gaps which take away from your stairs. You have to consider that a couple of laminate flooring for stairs suppliers is developing a stair nose which is flush with the laminate tread. This new kind of stair nose created from metal which is completed with wood grain to match the flooring.
How to install laminate flooring for stairs
First of all, you have to remove carpeting and check out the squeaks of the stairs, and you have to make sure that your stairs are flat. If you have stairs which are an overhang, you have to remove them, or you have to fill the space below the overhang area. It will take a lot of time to cut the laminate stair treads. When you get it properly, it can look like done by the professional.
You have to cut the risers properly to fit tight along the edges. It is very recommended for you to do them once the treads are cut, so they will lay on the tread which will be installed there. If you want to have the riser set flush on the tread below, you have to scribe it if the stair tread is not flat. After you cut the stair risers properly, you have to cut the stair nose to the right size. After that, you have to install the stair nose properly. You will get the laminate flooring for stairs that you want.